Installing synthetic grass – a guide for installation
Installing synthetic grass is easy…as long as you have detailed instructions, all the proper tools, and some real experience working with artificial turf. We can give you the installation guide, and recommend some tools, but since you can’t get experience off the internet, we can give you the next best thing: some common turf installation mistakes to avoid. Keep these in mind as you start your artificial turf installation project for a much smoother artificial turf installation process.
Mistake 1: Incorrect measurements
You’ve probably heard this before, but we can’t emphasize it enough: double-check your measurements! Measure your installation area at least twice, and from different directions. Make sure you’re getting the right amount of turf to cover your installation area most efficiently by going over your calculations with one of our turf consultants.
Mistake 3: Uneven base
An artificial turf lawn looks best when laid over a smooth surface. Any bumps or wrinkles stand out and make your lawn less attractive. When removing the existing landscaping, make sure you’ve also removed any roots or rocks that will cause unevenness. Then, we recommend using a sod roller or plate compactor to compact your base layer until it’s smooth.
Mistake 4: Flattening your base too much
Didn’t we just say you needed to compact your base until it’s completely smooth? Yes, make your base smooth, but shape it with a 1% incline towards the center. This will make your lawn look more natural, and allow water to drain away from the middle.
Mistake 5: Ignoring the grain
Blades of artificial turf have a natural “grain” or directionality. Pay attention to this grain, and always lay the turf in the same direction to avoid obvious seams in your lawn. For best results, we recommend facing the grain towards the viewer.
Mistake 7: Not installing a weed blocker
One of the benefits of artificial turf is that you no longer need to weed your lawn. However, for that to become reality, you need to apply a week blocker layer underneath your artificial turf to discourage weeds and other plants from growing through your lawn.
Mistake 8: Throwing away your scraps after your installation is done